If you want to renew your metal fence, gate, or railing, after disassembly, please bring it to our factory and choose a color based on the international RAL color scale.
We remove the old coating, and after sandblasting, we provide the surface with a powder coating.
The following large internal combustion furnaces are also available in our factory.
(length x height x width)
– 6000 x 2100 x 2400 mm
– 8000 x 2000 x 1400 mm
The size of the workpieces must be smaller than the above due to the ability to hang and fasten.
If you request, we put a DuPont primer powder under the color, which helps prevent corrosion later on when used outdoors.
IN THE CASE OF EXTERIOR GATE OR FENCE, WE ADVISE IN ALL CASES TO GALVANIZE THE WORKPIECE BEFORE SINTERING AS A PRE-TREATMENT PROCEDURE!
We can apply powder varnish to the galvanized work piece, and this procedure increases the lifespan of the gate or fence by years.
| Our current prices: |
| External enclosure size counted once |
| For galvanized parts – with degreasing | 12.000 HUF/m2 |
| For painted pieces – by firing, sandblasting | 18.000 HUF/m2 |
| If requested with primer, it is an extra charge | +7.000 HUF/m2 |
Our prices are net prices and do not include any shipping costs.